Instant Pot Not Sealing
Updated Nov 02, 2026
This post may contain affiliate links. Please see our disclosure policy.
If your Instant Pot isn't sealing or coming to pressure, don't assume something is broken. Most of the time, it's a quick fix.
After years of cooking with the Instant Pot and helping readers learn how to use an Instant Pot and troubleshoot problems, I've narrowed down the most common reasons an Instant Pot won't seal and, more importantly, how to fix them.

5 Things to Check When Your Instant Pot Won't Seal

Before troubleshooting, keep in mind that an Instant Pot can take 5-30 minutes to reach pressure, depending on the recipe. A little steam escaping during preheating is normal. But if the float valve never rises or steam continues escaping, your Instant Pot may not be sealing properly.
Here are the first things to check:
- Steam release valve: Make sure it's set to sealing, not venting.
- Sealing ring: Make sure the silicone ring is clean, properly fitted, and undamaged.
- Float valve: Make sure it can move freely, and that the small silicone cap underneath is in place.
- Liquid: Check that you've added enough thin liquid for your Instant Pot's size.
- Lid and inner pot: Check for food debris, damage, or anything preventing the lid from sealing properly.
Still having trouble? I'll walk you through what each problem looks like, why it happens, and how to fix it safely.
1. Check the Steam Release Valve
One of the most common reasons an Instant Pot won't seal is that the steam release valve is set to venting instead of sealing. When this happens, steam escapes instead of building pressure inside the pot.
And trust me, this is a mistake I've made more times than I'd like to admit!
How to fix it:
- Check the valve position. On models with a manual steam release valve, make sure it's set to sealing. Some newer models seal automatically when you close the lid.
- If steam has been escaping for several minutes, cancel the cooking cycle. Once the pot has fully depressurized, check that there is still enough liquid before restarting the recipe.
- If the valve is already set to sealing but steam keeps escaping, check for food debris or damage, following your model's instructions for cleaning the valve.

2. Check the Sealing Ring
The silicone sealing ring inside your Instant Pot lid creates the airtight seal needed for pressure cooking. If it's loose, improperly fitted, or damaged, steam can escape and prevent the Instant Pot from coming to pressure.
How to fix it:
- Check the placement. Make sure the sealing ring is fitted securely around the metal rack inside the lid. It should sit evenly, with no sections hanging loose.
- Clean the ring. Remove it and wash it with warm, soapy water. Check for food debris along the ring and the metal rack before putting it back in place.
- Look for damage. If the ring is cracked, stretched out, or no longer fits snugly, it's time to replace it.
Cooking back-to-back recipes? The sealing ring can expand when it's hot, especially after you've just finished pressure cooking. If you're having trouble getting the Instant Pot to seal for a second recipe, allow the ring to cool completely and check that it still fits snugly. If it's stretched out or damaged, replace it.
Note from Kristen
If you regularly use your Instant Pot, I recommend keeping an extra sealing ring on hand. They wear out over time, and having a replacement is much easier than discovering yours needs replacing when trying to cook dinner. I also I keep a separate one for sweet recipes like Instant Pot yogurt so it doesn't pick up savory smells.

3. Check the Float Valve
The float valve is the small metal pin on your Instant Pot lid that rises when pressure builds inside the pot. If it's stuck, dirty, or missing the silicone cap underneath, your Instant Pot may not seal properly.
How to fix it:
- Check for food debris. Once the Instant Pot has completely depressurized and cooled, check the float valve for dried food or residue that could prevent it from moving freely.
- Clean the float valve. Follow your model's instructions for removing and cleaning the float valve and surrounding area. Make sure it moves freely when reassembled.
- Check the silicone cap. Look underneath the lid to make sure the small silicone cap is securely attached to the float valve. If it's missing or damaged, you'll need a replacement.
Keep in mind: The float valve won't rise immediately when you start pressure cooking. It only rises once enough pressure has built up inside the pot.

4. Check That You Have Enough Liquid
Your Instant Pot needs liquid to create the steam that builds pressure. If there isn't enough liquid, the Instant Pot may struggle to come to pressure or display a burn warning.
How to fix it:
- Check the liquid amount. My general guideline is ½ cup of thin liquid for a 3-quart, 1 cup for a 6-quart, and 1½ cups for an 8-quart. I've tested this in many models over the years, but always check your manual and follow your recipe's liquid amount.
- Use thin liquid. Water, broth, and other thin liquids produce steam more readily than thick sauces. Tomato sauce, cream-based sauces, and other thick ingredients can scorch on the bottom of the pot before enough pressure builds.
- Check for evaporation. If steam has been escaping for an extended period, you may have lost too much liquid. Cancel cooking, allow the Instant Pot to fully depressurize, and check the liquid level before restarting.
5. Check the Lid and Inner Pot
If your Instant Pot still won't seal, check the lid and inner pot. Food debris, improper positioning, or damage can prevent the pot from sealing properly.
How to fix it:
- Check the rim. Make sure the inner pot rim is clean and free of food debris that could interfere with the seal.
- Check the lid placement. Make sure the inner pot sits properly inside the cooker, and the lid is fully closed and locked into place.
- Inspect for damage. Look for dents, warping, or damage to the inner pot or lid that could prevent a proper seal. If you notice damage, stop using the Instant Pot until the affected part has been replaced or evaluated by the manufacturer.
What If Your Instant Pot Still Won't Seal?
If you've checked the steam release valve, sealing ring, float valve, liquid level, and lid, but your Instant Pot still won't seal, you may want to contact Instant Pot customer support for help.
And remember, never force the lid open or attempt to repair a pressurized Instant Pot.
What If Your Instant Pot Says Burn?
If your Instant Pot displays a Burn or Food Burn warning, it means the bottom of the inner pot is getting too hot. This typically happens when food sticks to the bottom, there isn't enough thin liquid, or a thick sauce scorches before pressure builds.
How to fix it:
- Cancel cooking. Allow the Instant Pot to fully depressurize before opening the lid.
- Check the bottom of the pot. If food is stuck, transfer the contents to another dish, clean the inner pot, then restart.
- Add liquid if needed. Make sure your recipe has enough thin liquid to build pressure.
- Layer ingredients properly. Unless your recipe says otherwise, add thick sauces and tomato-based products last and don't stir them in, as I do in my Instant Pot Spaghetti recipe.
My tip: If you use the sauté function before pressure cooking, always deglaze the pot with a bit of broth or water, scraping up any browned bits. Those flavorful bits are great for your recipe, but leaving them stuck to the bottom can trigger a burn warning.

Final Tip: Get to Know Your Instant Pot
After years of cooking with several different Instant Pot models, I've learned that some are simply more temperamental than others. In my experience, the 8-quart Duo and Instant Pot Rio have been a little fussier when it comes to burn notices.
My advice? Pay attention to how your particular model behaves. A quick water test is an easy way to see how long yours takes to come to pressure and what normal steam looks like. Once you get familiar with how long it typically takes to come to pressure and what normal steam release looks like, it's much easier to recognize when something isn't right.













I have trouble with the pot releasing steam even though the valve is set to seal. How can I fix this or do I have to replace the valve? No problem with the sealing ring or steam escaping around the edge. Please help.
Is it just a tiny bit as it is coming to pressure? That can be normal. If a newer issue, I would suggest replacing your sealing ring if it worked normally before.
Good information!! Recently, my 8 quart wouldn't register anything. I've been using the same seal for about 3 years. I changed the seal, and it worked like a champ! No problems, since. I'm very careful about the "no stir" thing, so never had a burn notice, ever. In addition, I've been a stove-top pressure cooker user, and also done some canning, so not afraid of pressure cooking. Sometimes it's just a matter of understanding the process of what makes a pressure cooker work well, which you obviously know how do to! Keep up the good work!!!
I am glad you found my tips helpful! I really work hard to test and troubleshoot things so you don't have to.
A whole lot of GREAT in formation in this e-mail !
Thank you, Skip Davis
My 8 qt Instant Pot isn't sealing, and the gasket is clean and placed properly. Ssteam is releasing at the red floating valve, which is loose (falls out when lit is inverted). Wondering if there is a tiny O-ring that got lost or other part of the floating valve that got lost or damaged ? I don't think anything weird happened last time I used it, but this is how it is now. I ran one cycle of Soup/Broth with the steam releasing the whole time and the liquid was reduced WAY DOWN from what it would be with a sealed pot. :-(((
Hi Michelle! There is an piece that holds the floating valve in place in the lid (it should not fall out when inverted). I have a photo showing that piece here if that helps. You can order a replacement on Amazon.
My instant pot is not sealing and it won’t pop up ?
Do you have the sealing ring secured? Did you check the ring for cracks or tears? What are you cooking--is there enough liquid? Let me know and I will further troubleshoot for you.
I tried the 5 5 5 method, for eggs, they were runny and under cooked, I see everyone say about perfect eggs with this method, is there something wrong with my pot, gasket maybe? it is sealing but I think I'd have to do them at least 7 minutes, i live in ireland so not high altitude. this method used to work, so I think the pot isn't reaching the same pressure.
Hi Martin. It may be that your model is older, if 5-5-5 used to work for you. Try cooking for 7 minutes, use cold water, and see how that goes. If it doesn't work, you may need a new sealing ring. They can get old and worn out after a few years.
Martin, 5 5 5 doesn't work for me, especially when making a lot of eggs at one time. Try a longer cooking time, and a longer release time--maybe increase each increment by at least two minutes. If that doesn't work, increase another couple minutes. Volume can make a difference. Make sure you have them on a rack and have plenty of water.
My Presto 6 quart instapot is jammed. I can't open it so I can start cooking. What do I need to do?
Hey there! I am so sorry you are having issues. Is it pressurized or just jammed? It may be that the lid was bent if it is not using. Or it may be that if you were cooking, the pressure had not released and the lid was locked to prevent burning yourself.